TL2842DR Overview

Capsuled in the 14-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 10V~30V. Suitable for working in an dc switcher that has a -40°C~85°C TA. With this switching controller, you can switch at Up to 500kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. To ensure efficient switching, this dcdc regulator features a Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING REGULATOR. switching converters terminal (s) are designed to be at DUAL. A variety of 14 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. You can find other relevant dc to dc converter ics by searching "TL2842". There are a total of 14 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. A 30V voltage of DC regulator was detected in the test statistics. You should note down the dc dc regulator's usual output current of 200mA when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. Switching controller operates at 500kHz Hz. It is possible to set the input voltage as 5.5V for nominal working statuses. Switching controller is necessary to provide a voltage of 15V. In order to ensure proper operation, the controller should not receive more current than 30mA.

TL2842DR Features

Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz

TL2842DR Applications

There are a lot of Texas Instruments TL2842DR DC to DC converter applications.

• Medical monitoring systems
• Remotely powered electric motors
• Medical equipment
• Balance equipment
• Imported equipment
• Overvoltage protection circuits in TV sets
• Surge protection circuits
• seismic instrument power circuits
• Nuclear power plants
• Hydraulic presses