Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. It is sufficient to generate 2 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at 7V~40V volts and has 7V~40V supply voltage. Suitable for a 0°C~70°C TA dc switcher. There is a switch at 1kHz~300kHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. Dead Time Control, Frequency Control is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 16. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. In addition to "TL494", there are other relevant dc to dc converter ics you can find. 16 pins are on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. An input voltage of 7V is the minimum required for the dc dc voltage regulator. DC regulator outputs 40V voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. The maximum duty cycle of this voltage regulator dc to dc is set to 45 % to ensure reliability during power-up and power-down. A frequency of 300kHz is set for the switching controller. There is a requirement for a 15V supply voltage.
TL494CDRE4 Features
Transistor Driver Outputs Switching Frequency: 1kHz~300kHz Dead Time Control, Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 45 % Frequency: 300kHz
TL494CDRE4 Applications
There are a lot of Texas Instruments TL494CDRE4 DC to DC converter applications.