TL5001ACDR Overview

With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaged in solid enclosures, this pmic has a Cut Tape (CT) rating. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 3.6V~40V. Worked in an dc switcher with a -20°C~85°C TA rating. It can switch at 20kHz~500kHz. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Dead Time Control, Frequency Control for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at DUAL. Various 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 6V is input. Searching "TL5001" will return other relevant dc to dc converter ics. The switching converter has a total of 8 pins. A 50V voltage of DC regulator was detected in the test statistics. You should note that the dc dc regulator's usual output current is 20mA. 500kHz is the frequency of the switching controller. Users should apply 40V to operate the voltage regulator dc to dc safely and reliably. A dc switching in a dormant state uses 1.1mA. The maximum input voltage of the dc switcher is 40V, so users need to limit the voltage accordingly. In order to use a 3.6V voltage supply, switching controller is necessary to have one. Output current will not exceed 3A. At its maximum output, the switching converter can provide 50V volts. The supply current of the voltage controller is 1.1mA. There is 1V voltage output lower than 1V on the voltage controller.

TL5001ACDR Features

Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Frequency: 500kHz

TL5001ACDR Applications

There are a lot of Texas Instruments TL5001ACDR DC to DC converter applications.

• Planers
• Remotely powered electric motors
• Domestic water pumps
• Analog precision reference circuits
• Driver circuits
• Industrial robots
• Constant current circuits
• Automation technology
• Computer monitoring equipment of building
• Low output voltage switching power supply circuits