TL714CDG4 Overview
For convenience, it is packaged in SOIC .There is a TTL output type for this comparator.The comparator has a total of 8 terminals.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator has 8 pins.The comparator has a pin count of 8 .As a result, this comparator displays a quiescent current of 12mA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 12mA when using the device.A supply current exceeding 12mA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.Comparator electronics is not recommended to operate the system at a temperature above 70°C .Comparator electronics cannot be used at a temperature below 0°C .Comparator electronics is specified that the comparator's maximum supply voltage is 5.25V .A minimum supply voltage of 4.75V is permitted for this comparator.To ensure a high level of output quality, 1 channels work together.In essence, the comparator has a COMPARATOR amplifier with a high gain.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.
TL714CDG4 Features
TTL output capability
Quiescent Current: 12mA
COMPARATOR amplifier
TL714CDG4 Applications
There are a lot of Texas Instruments
TL714CDG4 linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
