TL7715ACP Overview

There are 8 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tube. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. Manage ics operate at 5V supply voltages. When 1 is applied to the power ic, it conducts. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 8. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 3.5V. There should be no more than 18V volts of supply voltage (Vsup) in this power management. Through Hole is the recommended mounting type. Temperature setting for the supervisors should be 0°C~70°C TA. The output voltage of this power managment ic during operation is Complementary. It is estimated that the voltage supervisor's supply current is 1.8mA. It is always advisable to use TL7715, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3mA.

TL7715ACP Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
1.8mA operating supply current

TL7715ACP Applications

There are a lot of Texas Instruments TL7715ACP Voltage Supervisors applications.

• Functional modules
• DSP
• Insulation fault location system
• Solar power charger
• FPGA design
• WiFi router
• Electronics installed in the vehicle
• Display equipment
• Satellite navigation
• Detection of phase imbalance