TL7757IPK Overview

There are 3 terminals on this power management that allow it to be mounted. It is packaged with Cut Tape (CT). In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are TO-243AA functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 4.3V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. There are a total of 3 pins on power management. 3 pins are on the supervisor. IC management can only work with a supply voltage of 1V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 1.4mA volt supply current. There are also other features in the software such as [0], just to mention a few. It is always advisable to use TL7757, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 2mA.

TL7757IPK Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.4mA operating supply current

TL7757IPK Applications

There are a lot of Texas Instruments TL7757IPK Voltage Supervisors applications.

• WiFi router
• Power distribution systems of operating room
• Power distribution systems of infant care room
• FPGA design
• Electronics installed in the vehicle
• Detection of phase loss
• Microprocessor system
• Insulation fault location system
• Low voltage/high power - AI, GPU
• Power communication system