TL7770-5IDW Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Power management is packaged in a Tube way. Please refer to this PMIC for 1 functions. There are 2 channels on this power managment ic that can be found in a series. Please find attached 16-SOIC (0.295, 7.50mm Width) functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 5V is used to conduct the PMIC chip. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 16 pins. There are 16 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3.5V. There should be no more than 18V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Complementary. There is a 5mA supply current present in the power management. There are other features such as POWER ON RESET GENERATOR to name a few. It is always advisable to use TL7770, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 5mA.

TL7770-5IDW Features

Multi-Voltage Supervisor type
Minimum supply voltage of 3.5V
5mA operating supply current

TL7770-5IDW Applications

There are a lot of Texas Instruments TL7770-5IDW Voltage Supervisors applications.

• Sensitive sensors
• Rechargeable batteries
• Embedded computing
• Smart meter
• DVR
• Dash board
• Microcontroller system
• Urban rail transit weak current power monitoring
• Power distribution systems of infant care room
• Efficient information transmission