TLC2272QPWRG4Q1 Overview

Packaged in a 8-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 2.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 2.4mA . There should be no change in the voltage gain at 90.88dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of instrumentation amplifier is rated 8V voltage. The instrumentation amplifier is packed in the form of TR. As the name implies, Automotive, AEC-Q100, LinCMOS? refers to the series of the buffer op amp.

TLC2272QPWRG4Q1 Features

8 Pins
supply voltage of 5V
90.88dB voltage gain
Output Type: Rail-to-Rail

TLC2272QPWRG4Q1 Applications

There are a lot of Texas Instruments TLC2272QPWRG4Q1 Instrumentational OP Amps applications.

• Ultrasound transducers
• Medical instruments
• Micro signal measurement
• Semiconductor detectors
• Differentiator circuits
• Car stereo
• Video data acquisition
• Exponential operation circuits
• MP3
• Laptop