TLC5924DAPG4 Overview

Using its HTSSOP EP package, it is possible to save board space. A frequency of 30MHz is used to operate it.The operation of this system is supported by 32 terminations.This configuration is built upon 32 pins.16 segments are present.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.Its output voltage is 15V.The device has a pin count of 32.In addition to Display Drivers, it is also classified by its characteristics.With 3V as the minimal input voltage, it operates.A minimal supply voltage of 3V is required for it to achieve the highest efficiency.The maximum supply current is 5.5V.It is possible to provide high efficiency when the maximal supply current is less than 65mA.The operating temperature should not exceed 85°C to ensure stable operation.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.When operating at the maximum output current of 80mA, it is capable of providing all the benefits associated with LED drivers.IC LED DISPLAY DRIVER is used on this part as an interface IC.Keep the part's output current at 80mA volts.

TLC5924DAPG4 Features

Available in the HTSSOP EP package
Frequency of 30MHz
Supply voltage of 5V

TLC5924DAPG4 Applications

There are a lot of Texas Instruments
TLC5924DAPG4 LED Driver ICs applications.

• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights