As a result of its SSOP package, it helps to save board space on the board. Using the frequency of 30MHz, it operates.In order for it to operate, it has 24 terminations.The base is configured with 24 pins.There are 16 segments in it.5.5V is an acceptable maximum value for the supply voltage.The output voltage of the device is 17V.There are 24 pins on this device.In addition, it can also be categorized into Display Drivers based on its characteristics.This device operates with a minimum input voltage of 3V volts.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.Currently, the supply current can only reach 5.5V.When the supply current should be less than 20mA, the device will provide high efficiency.For stable operation, it is recommended that the operating temperature not exceed 85°C.In order to maintain stable operation, a temperature greater than -40°C is essential.There's an interface IC marked with LED DISPLAY DRIVER on this part.The part output current should be kept at 120mA.
TLC5926IDBQRG4 Features
Available in the SSOP package Frequency of 30MHz Supply voltage of 3.3V
TLC5926IDBQRG4 Applications
There are a lot of Texas Instruments TLC5926IDBQRG4 LED Driver ICs applications.
High-end retail lighting
Medical surgery lighting
Replacement lamps
Panel lighting
Down lights
Linear fluorescent
A- lamps
General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
Industrial LED Lighting: Image Recognition Devices