TLC7733QP Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. There is a Tube-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a 8-DIP (0.300, 7.62mm) package. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 5V. IC management conducts in a 1-voltage supply. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 8. 8 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 9μA. Among other features, IC power can be also taken advantage of [0], for instance. If you want to search for similar IC managements of this manufacturer, you can always refer to TLC7733, which is the base power ics number. Voltage supervisor can work with a supply temperature of 16μA at the most.

TLC7733QP Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current

TLC7733QP Applications

There are a lot of Texas Instruments TLC7733QP Voltage Supervisors applications.

• Medical-specific isolation transformer
• Stable power system
• Detection of phase imbalance
• Display equipment
• DC stabilized power supply module
• DVR
• Sensitive sensors
• FPGA design
• Solar power charger
• Cloud computing