TLV2352IDRG4 Overview

In order to make transportation easier, it is packaged in SOIC .A comparator with an output type of TTL is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.A total of 8 pins are included.The comparator consists of 8 pins.There is 400μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 300μA .A current supply greater than 300μA may cause the comparator to malfunction.The device can be run with 3/5V power supplies.Electronic comparator is possible to input a maximum of 5pA current into the device.In general, temperatures higher than 85°C are not recommended.Comparator electronics will not be able to function at temperatures below -40°C .A comparator's maximum supply voltage is 8V volts.Using a voltage as low as 2V is possible for this comparator.For the output quality to be maintained, 2 channels work together.There is essentially a very high gain COMPARATOR amplifier in the comparator.A 20mA output current is specified for this device.

TLV2352IDRG4 Features

TTL output capability
Quiescent Current: 400μA
COMPARATOR amplifier

TLV2352IDRG4 Applications

There are a lot of Texas Instruments
TLV2352IDRG4 linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications