TLV2451IDR Overview

There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 3V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 23μA and 10 . There should be no change in the voltage gain at 103dB. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. The operating supply voltage of the buffer op amp is rated at 3V. The instrumentation amplifier is packed in the form of TR.

TLV2451IDR Features

8 Pins
supply voltage of 3V
103dB voltage gain
Output Type: Rail-to-Rail

TLV2451IDR Applications

There are a lot of Texas Instruments TLV2451IDR Instrumentational OP Amps applications.

• Comparator
• Television
• Test and measurement instruments
• Voltage regulation circuit
• High/low-pass filter circuit
• Navigation
• Logarithmic operation circuits
• pH (acidity)
• Proportional operation circuits
• Micro signal measurement