TLV3404IPWRG4 Overview

The product is packaged in 14-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.Output type of this comparator is CMOS, Open-Drain .The part is shipped by Tape & Reel (TR) .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .This is a typical comparator of type General Purpose .Currently, it consists of only 4 elements.The device includes 14 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.14 pins are available on the comparator.In order to find a solution that meets your specific needs, search TLV3404 for more pin-to-pin solutions.A quiescent current of 950nA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 550nA .An excess of current supply over 550nA could result in malfunction of the comparator.A power supply of +-1.35/+-8/2.7/16V is sufficient for the operation of the device.The voltage gain of the part is indicated by 120dB in the voltage formula.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.

TLV3404IPWRG4 Features

CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB

TLV3404IPWRG4 Applications

There are a lot of Texas Instruments
TLV3404IPWRG4 linear comparators applications.

• Self-diagnostics
• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices