TPS2456RHHR Overview

In the 36-VFQFN Exposed Pad package you will find it.Channel 2 is currently available.A Tape & Reel (TR)-shaped package holds it.The 36 terminations total to three.Device QUAD is located at the terminal position.The device consists of a total of 36 pins.The supply voltage 12V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller, OR Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for General Purpose are available on the device.A feature of Latched Fault, Thermal Limit, UVLO describes it.Using a 8.5V~15VV power source should be able to power the device.The TPS2456 family includes it.During operation, 36 pins are used.Hot-swappable device has Circuit Breaker, Current Limit, Fault Timeout, Slew Rate programmable features.Presently, there is a sufficient supply of 3.1mA.As you can see, it is positioned in the direction of Surface Mount.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 8.5V so that the device can function normally.Vsup is set to 15V, the maximum supply voltage.There is a maximum current requirement of 4mA for it to operate.With the help of this device, THRESHOLD VOLTAGE IS 1.35 V can also be produced.

TPS2456RHHR Features

The terminal position of 36
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Circuit Breaker, Current Limit, Fault Timeout, Slew Rate

TPS2456RHHR Applications

There are a lot of Texas Instruments
TPS2456RHHR hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems