TPS24700DGK Overview
You can find it in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.At the moment, 1 channels are accessible.In the form of a Tube, it is packaged.The terminations total 8.In this case, the device is located at terminal DUAL.The device has a total of 8 pins.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 12V.Surface Mount has set it up this way.An electrical component classified as Hot Swap Controller belongs to this category.Ensure reliable operation by setting the temperature to -40°C~85°C.A General Purpose application is available for the device.There is a mention of it in Latched Fault, Thermal Limit.In theory, it should work as long as the power source has a 2.5V~18VV input.This number is a member of the TPS24700 family.In order to operate, 8 pins are used.The programmable features of this device are Current Limit, Fault Timeout, UVLO.In Surface Mount direction, it is positioned.Normally, Vsup should remain above 2.5V.Currently, 1mA is the supply current.Its maximum current requirement is 1.4mA.25.8V output voltages are capable of high efficiency.
TPS24700DGK Features
The terminal position of 8
Features of Latched Fault, Thermal Limit
Programmable features of Current Limit, Fault Timeout, UVLO
Output voltage of 25.8V
TPS24700DGK Applications
There are a lot of Texas Instruments
TPS24700DGK hot swap controllers applications.
- Industrial
-
- Datacom
-
- Electric vehicle
-
- Avionics systems
-
- Safe board insertion and extraction
-
- Industrial computers and servers
-
- Redundant-array-of-independent-disk (RAID) storage
-
- Other forms of communications infrastructure
-
- Board or blade insertion into live backplanes
-
- Backplane
-
