TPS3307-25D Overview

There are 8 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tube. Please refer to this PMIC for 1 functions. There are 3 channels on this power managment ic that can be found in a series. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts at a voltage of 3.3V. IC management conducts in a 3-voltage supply. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. Power managment ic pin count is 8. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2V volts. There should be no more than 6V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 15μA volt supply current. A similar IC managements number of the manufacturer can always be found by using TPS3307, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 40μA. 40A currents are rated for the IC management.

TPS3307-25D Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
Current rating of 40A

TPS3307-25D Applications

There are a lot of Texas Instruments TPS3307-25D Voltage Supervisors applications.

• Battery-powered equipment
• Insulation fault location system
• Digitally controlled LDO regulators circuit
• Detection of phase imbalance
• Radar
• Microprocessor system
• FPGA design
• Microcontroller system
• Sensitive sensors
• Automotive power systems