TPS3600D50PW Overview

There are 14 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tube-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. In this IC management you will find 14-TSSOP (0.173, 4.40mm Width) functions for you to refer to. This IC power shares lots of benefits with other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 5V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 14 pins on the board. Pin count of the power management is 14. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.65V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The power management's supply current is 20μA. It is always advisable to use TPS3600D50, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 40μA.

TPS3600D50PW Features

Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current

TPS3600D50PW Applications

There are a lot of Texas Instruments TPS3600D50PW Voltage Supervisors applications.

• Automotive power systems
• Dash board
• Military communications
• Medical-specific insulation monitor
• Microprocessor system
• Battery cars
• Leakage protection
• Embedded computing
• DVR
• Utility meter