TPS3705-33DGN Overview

There are 8 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tube model. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 3.3V volt supply. In a 1 supply voltage, the PMIC chip conducts. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. 8 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 30μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3705, which is the base power ics number. A maximum supply temperature of 50μA can be used with this power management. There are 2 elements to this supervisor, which can be used in a variety of applications.

TPS3705-33DGN Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
30μA operating supply current

TPS3705-33DGN Applications

There are a lot of Texas Instruments TPS3705-33DGN Voltage Supervisors applications.

• Display equipment
• Power distribution systems of CCU
• External alarm
• Battery cars
• Radio
• Detection of phase imbalance
• Satellite navigation
• DSP
• Functional modules
• Smart meter