TPS3823-33DBVT Overview

This power management consists of 5 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 3.3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 5 pins on the board. Power managment ic pin count is 5. IC management can only work with a supply voltage of 1.1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 15μA. There are also other features in the software such as [0], just to mention a few. You can always use TPS3823, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 25μA at the most.

TPS3823-33DBVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current

TPS3823-33DBVT Applications

There are a lot of Texas Instruments TPS3823-33DBVT Voltage Supervisors applications.

• Military communications
• Fire equipment power monitoring system
• Computer applications
• DVR
• Sensitive sensors
• Utility meter
• Set top box
• Personal computers
• Radio
• Power distribution systems of ICU