TPS3825-50DBVTG4 Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 3.3V volt supply. Power ics operate at 1 supply voltages. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. There are 5 pins on the supervisor. It is recommended that Vsup should not be less than 1.1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a supply current of 15μA for the power management. To find similar IC managements from the manufacturer, you can always search by TPS3825. At the most, voltage supervisor can work with a supply temperature of 25μA.
TPS3825-50DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current
TPS3825-50DBVTG4 Applications
There are a lot of Texas Instruments TPS3825-50DBVTG4 Voltage Supervisors applications.
- Microprocessor system
- Embedded computing
- Digitally controlled LDO regulators circuit
- Magnetic resonance imaging
- Electronics installed in the vehicle
- DSP
- Electric heating appliances
- Medical-specific isolation transformer
- Analog circuit
- Stable power system
