TPS3839G12DQNT Overview

There are 4 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Cut Tape (CT). For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 4-XDFN Exposed Pad functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. Power management conducts at a voltage of 1. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Pin count of the power management is 4. There should be a minimum voltage supply (Vsup) of 900mV for this PMIC. The supply voltage (Vsup) should not exceed 6.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 150nA. To find similar IC managements from the manufacturer, you can always search by TPS3839G12. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 500nA.

TPS3839G12DQNT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
150nA operating supply current

TPS3839G12DQNT Applications

There are a lot of Texas Instruments TPS3839G12DQNT Voltage Supervisors applications.

• Electronics installed in the vehicle
• Smart meter
• Automotive permanent magnet synchronous motors
• Rechargeable batteries
• Display equipment
• Power communication system
• Unattended substation automation
• Cloud computing
• Power distribution systems of CCU
• Detection of phase imbalance