TPS3896ADRYR Overview

A total of 6 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. In this PMIC, you can find 6-UFDFN functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 3.3V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. In total, IC powers are 6 pins on the board. 6 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.7V. During this IC power, the maximum supply voltage (Vsup) should not exceed 6.5V volts. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TJ. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 6μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by TPS3896.

TPS3896ADRYR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.7V
6μA operating supply current

TPS3896ADRYR Applications

There are a lot of Texas Instruments TPS3896ADRYR Voltage Supervisors applications.

• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Medical-specific isolation transformer
• Important electronics for automotive protection
• Linux and server computing
• Refrigeration
• FPGA design
• Important electronics for automotive safety
• Urban rail transit weak current power monitoring