TPS40002DGQG4 Overview

It comes in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 2.25V~5.5V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 10 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. TPS40002 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 10 pins. Switching converter is a special type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 700mV. You should note down the dc dc regulator's usual output current of 15A when you start a project. A duty cycle set at 97 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at a frequency of 600kHz. DC switchings that are dormant use 1.5mA. You can set the input voltage to 5V for nominal working status. The dc switcher's maximum input voltage is 5.5V; users must limit it accordingly. There must be a 2.25V supply voltage. Its datasheet indicates the switching converter can output a maximum of 4V volts. voltage controllers with a minimum voltage output of 700mV cannot operate.

TPS40002DGQG4 Features

Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %
Frequency: 600kHz

TPS40002DGQG4 Applications

There are a lot of Texas Instruments
TPS40002DGQG4 DC to DC converter applications.

• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers