TPS40021PWPG4 Overview

This switching controller fits most application requirements since it is packaged in a 16-PowerTSSOP (0.173, 4.40mm Width) package. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. 2.25V~5.5V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~85°C TA dc switcher. There is a switch at 100kHz~1MHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. Current Limit, Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 16 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 5V. You can find other relevant dc to dc converter ics by searching "TPS40021". There are only 16 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. DC regulator outputs 4V voltage according to the test statistics. normally, the dc dc regulator's output current is 25A, which you should keep in mind when starting a project. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulator's maximum frequency is 1.1MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 5.5V. When the dc switching is dormant, it uses 1.5mA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 5.5V. The supply voltage must be 2.25V. Its lowest voltage output is not less than 700mV.

TPS40021PWPG4 Features

Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION

TPS40021PWPG4 Applications

There are a lot of Texas Instruments
TPS40021PWPG4 DC to DC converter applications.

• Digital display device
• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment