TPS40200DG4 Overview

With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~52V and has a 4.5V~52V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 35kHz~500kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Frequency Control, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 8 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Searching "TPS40200" will return other relevant dc to dc converter ics. 8 pins are on switching converter. Based on the test statistics, DC regulator outputs voltage 46.8V. If you are starting a new project, you should note the dc dc regulator's typical output current is 2.5A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 95 %. Switching controllers work at 300kHz Hz. DC switching uses 1.5mA when it is dormant. A nominal working status is achieved when the input voltage is set to 12V. In order to ensure the dc switcher's functionality, users must limit the voltage to 52V due to the dc switcher's maximum input voltage. In order to use a 4.5V voltage supply, switching controller is necessary to have one. DC switchers cannot produce output currents greater than 3A. Datasheets state the switching converter can output up to 46V volts. At least 700mV voltage is output by the voltage controller.

TPS40200DG4 Features

Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 300kHz

TPS40200DG4 Applications

There are a lot of Texas Instruments
TPS40200DG4 DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots