TPS43335QDAPRQ1 Overview

With its 38-PowerTSSOP (0.240, 6.10mm Width) package, the switching controller fits the needs of most applications. For outputs of 3, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 4V~40V and has a 4V~40V supply voltage. Worked in a -40°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 150kHz~600kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Power Good, Soft Start, Tracking. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 38 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 13V is input. Searching "TPS43335" will return other relevant dc to dc converter ics. 38 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator should be 4V. Based on the test statistics, DC regulator outputs voltage 11V. If you are starting a new project, you should note the dc dc regulator's typical output current is 6A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 98.75 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 600kHz on this dc regulators. This value is ALSO HAS A CONTROL TECHNIQUE OF PFM; OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 11V so that DC to DC voltage regulator better serves the purpose. When running the voltage regulator dc to dc in a circuit, users should apply 40V to ensure safety and reliability. Automotive, AEC-Q100 series dc to dc voltage regulator belong to this series. DC switching uses 30μA when it is dormant. There is 30μA supply current for it.

TPS43335QDAPRQ1 Features

Transistor Driver Outputs
Switching Frequency: 150kHz~600kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 98.75 %
ALSO HAS A CONTROL TECHNIQUE OF PFM; OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 11V

TPS43335QDAPRQ1 Applications

There are a lot of Texas Instruments
TPS43335QDAPRQ1 DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots