TPS5110PW Description

It is packaged in 24-TSSOP (0.173, 4.40mm Width) for voltage regulators' voltage regulators' transportation.We have Tube packages ready for shipping.There are total of 2 outputs that are supported by voltage regulator.To ensure that the system does not malfunction, the operating temperature should be set to -40°C~85°C.Using search TPS5110 will help you find more pin-to-pin solutions.In the switching regulator, you can find 24 terminals that are connected to the board.The pinout of the switching regulator starts from 24 pins it has.When proceeding relow solder, temperature is allowed to peak 260.It has 24-shaped pins.It can be used for a variety of applications since it has an output voltage of 3.5V.For this regulator, input voltage must be multiplied by 4.5V.There is a maximum voltage that this voltage regulator can use, 28V.The DC DC Switching Regulator should be displaying 1.2A as its current output.During quiescent mode, the regulator controller displays a quiescent current of 900μA.It is designed to produce as much current 15A as possible at its maximum capacity.There is a minimum voltage that can be outputted by this controller output, which is 900mV.The maximum voltage that can be output by this voltage regulator is 3.5V voltage.

TPS5110PW Features

2 outputs
Operating Temperature: -40°C~85°C
Peak Reflow Temperature: 260
Quiescent Current: 900μA

TPS5110PW Applications

There are a lot of Texas Instruments TPS5110PW Linear Regulator Controllers applications.

• Desknotes and Notebooks

• High Efficiency Linear Regulators

• Low-Voltage DSP Power Supplies

• Ultrahigh current ultralow dropout voltage regulator

• TVs

• Low noise SMPS post regulator

• Battery Operating Equipment

• Monitors

• Error Amplifiers

• Graphic Cards