TPS53114PW Overview

It comes in a 16-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~24V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 350kHz 700kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 16 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. TPS53114 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter is a special type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 24V. You should note down the dc dc regulator's usual output current of 170mA when you start a project. This dc regulatorhas a max frequency of 700kHz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V so that the need can be met more directly. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 12V. D-CAP2™ is a series of dc to dc voltage regulator. DC switchings that are dormant use 350μA. The dc switcher's maximum input voltage is 24V; users must limit it accordingly. There must be a 4.5V supply voltage. There should be 0.6mA more than 0.6mA amps of current supplied to the controller. Its datasheet indicates the switching converter can output a maximum of 5.5V volts. It runs on a 350μA supply current. voltage controllers with a minimum voltage output of 760mV cannot operate.

TPS53114PW Features

Transistor Driver Outputs
Switching Frequency: 350kHz 700kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V

TPS53114PW Applications

There are a lot of Texas Instruments
TPS53114PW DC to DC converter applications.

• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers