TPS54680MPWPEP Overview

There are 1 outputs supported by it. It is packaged in a 28-PowerTSSOP (0.173, 4.40mm Width) container to facilitate transportation. Currently, Tubepackages are available for shipping. In general, this regulator outputs a voltage of  0.9V~3.3V. It has a mounting type of Surface Mount. It is intended to be used in applications such as Converter, Distributed Power Systems and others. It is recommended that the operating temperature be set to -55°C~125°C to prevent malfunctions. The regulator is designed to operate at a voltage of 3V~6V. As a DUAL SWITCHING CONTROLLER regulator, the part has received high praise. Find more pin-to-pin solutions for your specific requirements by searching TPS54680. The PCB or other board can be mounted using the Surface Mounton it. 28pins are present on the device. It is necessary to have a voltage of  6V for normal operation. The device should be outputting 6Aat the moment. It is required that the input voltage be higher than 3V. This regulator is capable of switching at a frequency of 700kHz. The device's series is indicated by SWIFT?. At maximum output, it is designed to produce a current of 6A. The regulator displays a quiescent current of 11mA.

TPS54680MPWPEP Features

• Widely used in Converter, Distributed Power Systems applications

• DUAL SWITCHING CONTROLLER analog IC

• Supply voltage: 6V

TPS54680MPWPEP Applications

There are a lot of Texas Instruments TPS54680MPWPEP Specialized Voltage Regulators applications.

• High-Density Distributed Power Systems

• LCD-TV/PDP-TV

• SSTL_18, SSTL_15, SSTL_135 and HSTL

• Notebook Computers System Bus and I/O

• Notebook Computer Displays

• DDR Memory Termination

• Handy Terminals

• Active Termination of GTL and SSTL

• Mobile Radios

• WLAN