TPS64203DBVT Overview

It comes in a SOT-23-6 package, so switching controller can be used for most applications. dc motor controller is suitable for 1 output generation. There is a Cut Tape (CT) solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. Voltages 1.8V~6.5V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The Surface Mount value makes it suitable for general dc dc regulator. To provide efficient switching control, Enable is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 6 terminations. A DC switcher's nominal voltage of 3.8V is input. TPS64203 can be searched for other relevant dc to dc converter ics. Total pins of switching converter are 6. As determined by the test statistics, the output voltage of DC regulator is 6.5V. You should note down the dc dc regulator's usual output current of 3A when you start a project. In dormant mode, 20μA is used. You can set the input voltage to 3.8V for nominal working status. Since the dc switcher's maximum input voltage is 6.5V, the voltage must be regulated accordingly. The supply voltage must be 1.8V. An output current greater than 3A cannot be provided by the dc switcher. The datasheet indicates that the switching converter can output 6.5V volts at its maximum. Its lowest voltage output is not less than 1.2V. At 800kHz, this controller performs best.

TPS64203DBVT Features

Transistor Driver Outputs
Enable
Switching Frequency: 800kHz

TPS64203DBVT Applications

There are a lot of Texas Instruments TPS64203DBVT DC to DC converter applications.

• Solar power plants
• Correction machines
• Laboratories
• Household control circuits
• Shearing machines
• Product testing
• Energy management systems
• Geothermal power
• Telecommunications equipment
• Various CNC machine tools