TPS65100PWP Overview

Generally, it supports 4 outputs at a time. The alternator regulator is packaged in a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad container to facilitate transportation. Ready for shipping in Tube package. Volatge output for this voltage controller is Multiple. For easy adaptability, there is a universal mount Surface Mount. There are a number of applications targeted at Controller, TFT LCD. In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C. The external regulator is designed to operate at a voltage of 2.7V~5.8V. The voltage regulator contains 24terminals. As a SWITCHED CAPACITOR REGULATOR regulator, the electronic part has received lots of praise. The pinout of the rectifier regulator begins with the pins it has at 24. Try search TPS65100 to get more pin-to-pin solutions for your special needs. A power supply regulator with 24pins is present. In addition to these, there are other Power Management Circuits like the AC voltage regulator that play a significant role in the industry. A voltage greater than 2.7Vis required for this rectifier regulator. As the power regulator is supplied with a voltage of 3.3V, it can perform a wide range of demanding tasks. The voltage controller can switch at a frequency of 1.6MHz. At its maximum output, voltage regulator produces current 20mA. In this alternator regulator, the quiescent current is 700μA. Minimum supply voltage is 2.7V. DC voltage regulators operate at a maximum supply voltage of 5.8V volts. A range of frequencies 2.1MHzis covered by this shunt regulator.

TPS65100PWP Features

Widely used in Controller, TFT LCD applications
SWITCHED CAPACITOR REGULATOR analog IC

TPS65100PWP Applications

There are a lot of Texas Instruments TPS65100PWP Specialized Voltage Regulators applications.

• Communications Infrastructure
• Point of Load Regulation for High
• Precision Point of Load Power Supply
• Printers
• Distributed power architectures (24 V/48 V bus)
• Telecom/Datacom
• DDR I or DDR II Termination
• LCD Monitors
• SSTL_18, SSTL_15, SSTL_135 and HSTL
• High-Density Distributed Power Systems