DUAL Analog Switches BREAK-BEFORE-MAKE 14 Pins 3V SOIC
SOT-23
TS12A44514DRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Package / Case
SOIC
Number of Pins
14
Weight
129.387224mg
Packaging
Tape and Reel
JESD-609 Code
e4
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
14
Resistance
20Ohm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Subcategory
Multiplexer or Switches
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
3V
Terminal Pitch
1.27mm
Pin Count
14
Number of Outputs
4
Temperature Grade
INDUSTRIAL
Number of Channels
1
Max Supply Voltage
12V
Min Supply Voltage
2V
Power Dissipation-Max
1.15W
Operating Supply Current
50nA
Power Dissipation
1.15W
Max Supply Current
50nA
Throw Configuration
SPST
Turn On Delay Time
120 ns
Supply Type
Single
Bandwidth
530MHz
Turn-Off Delay Time
80 ns
Off-state Isolation-Nom
94 dB
On-state Resistance Match-Nom
3.5Ohm
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
175ns
Normal Position
NO
Length
8.65mm
Height Seated (Max)
1.75mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
TS12A44514DRG4 Product Details
TS12A44514DRG4 Overview
Shipping overseas is convenient with the electronic component packed in SOIC. High reliability is provided by advanced packaging method Tape and Reel. Total terminations are 14. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. The electronic part body is injected with 14 pins. There is 20Ohm internal resistance in this digital multiplexer. For functions related to 14 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 12V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 2V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 50nA current would be sufficient. The analogue multiplexer may be damaged if voltage is greater than 50nA. A 530MHz-bandwidth can be used for data transfer. Temperatures above 85°C should not be used to operate the switches. The analogue multiplexer has 4 outputs.
TS12A44514DRG4 Features
1 Channels 50nA Supply Current Bandwidth: 530MHz
TS12A44514DRG4 Applications
There are a lot of Texas Instruments TS12A44514DRG4 Analog Switches & Multiplexers ICs applications.