TS3A4742DCNR Overview

Packed in SOT-23-8, the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 8. This electronic part offers high-quality output due to its 2 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. There are 8 pins injected into the electronic part body. A SPST - NC switching circuit is used to build these analog multiplexers. Use TS3A4742 to search for variants of the digital switches. A 700mOhm internal resistance characterizes this multiplexer. Please refer to the datasheets for 8 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 3.6V should not normally be supplied to the switches. Analog switch ics with Single supply type are cost-effective. It is recommended to use 1.65V as the lowest voltage for the electrical part. A voltage of 1.6V~3.6V is required for this switch device, which drains from a single voltage source. When the digital multiplexer is charged above 750nA, damage can occur. Operating voltages range from 3V. In order to operate the 2 inputs, there are several steps to follow. The data can be transferred over a wide range of bandwidths, called 125MHz bandwidths.

TS3A4742DCNR Features

2 Channels
Switch Circuit: SPST - NC
Bandwidth: 125MHz

TS3A4742DCNR Applications

There are a lot of Texas Instruments TS3A4742DCNR Analog Switches & Multiplexers ICs applications.

• Medical systems
• FTTH
• New designs requiring multiplexer functions
• SDH
• Fiber In The Loop (FITL)
• Audio/video switches
• Multiplexers
• Modems
• Medical
• Access Concentrators