Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 4:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 4 channels. It is safe to turn on and run the electronic component with a 2.5V voltage supply. A total of 16 pins are injected into the electrical part body. A SP4T switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 2. Using the TS3A5017 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 12Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 2.3V is the lowest voltage the electrical component should receive. For this digital switch to work, 2.5μA current would suffice. An analogue multiplexer drains from a single voltage supply at 2.3V~3.6V. Putting voltage greater than 7mA on the multiplexer may cause damage. The data can be transferred over a wide range of bandwidths, called 165MHz bandwidths. In this digital multiplexer, there are 8 outputs.
TS3A5017PWG4 Features
4 Channels Switch Circuit: SP4T 2.5μA Supply Current Bandwidth: 165MHz
TS3A5017PWG4 Applications
There are a lot of Texas Instruments TS3A5017PWG4 Analog Switches & Multiplexers ICs applications.
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement
Battery Powered Systems
Existing multiplexer applications (both fault-protected and nonfault-protected)