Welcome to Hotenda.com Online Store!

logo
userjoin
Home

TS3A5017PWR

  • TS3A5017PWR
  • TS3A5017PWR

TS3A5017PWR

TS3A5017PWR

Texas Instruments

9.5ns, 3.5ns SP4T 12Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

TS3A5017PWR Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 6 Weeks
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 61.887009mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Termination SMD/SMT
ECCN Code EAR99
Resistance 12Ohm
Subcategory Multiplexer or Switches
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 2.5V
Base Part Number TS3A5017
Pin Count 16
Number of Outputs 8
Polarity Non-Inverting
Number of Channels 4
Number of Circuits 2
Max Supply Voltage 3.6V
Min Supply Voltage 2.3V
Operating Supply Current 2.5μA
Nominal Supply Current 2.5μA
Max Supply Current 7μA
Throw Configuration 4PST
Propagation Delay 9.5 ns
Turn On Delay Time 9.5 ns
Supply Type Single
Bandwidth 165MHz
Turn-Off Delay Time 4.5 ns
On-State Resistance (Max) 12Ohm
High Level Output Current 128mA
Low Level Output Current 128mA
Multiplexer/Demultiplexer Circuit 4:1
Off-state Isolation-Nom 48 dB
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 4.5pF 19pF
On-state Resistance Match-Nom 1Ohm
Switch Circuit SP4T
Switch Time (Ton, Toff) (Max) 9.5ns, 3.5ns
Charge Injection 5pC
Channel-to-Channel Matching (ΔRon) 1 Ω
Crosstalk -49dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 10ns
Switch-off Time-Max 6ns
Voltage - Supply, Single (V+) 2.3V~3.6V
Drain to Source Resistance 12Ohm
Normal Position NC
Signal Current-Max 0.1A
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $0.88000 $0.88
500 $0.8712 $435.6
1000 $0.8624 $862.4
1500 $0.8536 $1280.4
2000 $0.8448 $1689.6
2500 $0.836 $2090
TS3A5017PWR Product Details

TS3A5017PWR Overview


This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 4:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 4 channels. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. A total of 16 pins are injected into the body of the electronic part. The analog switch ics are built using SP4T switching circuits. This multiplexer is composed of 2 circuits. Try searching for the analog switch ic with TS3A5017 if you are looking for variants. This digital multiplexer has 12Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 3.6V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. There should be 2.3V voltage fed to the electrical part below 2.3V. It would be sufficient to run this analogue multiplexer with 2.5μA current. An analogue multiplexer drains from a single voltage supply at 2.3V~3.6V. Putting voltage greater than 7μA on the multiplexer may cause damage. It is possible to transfer data over a 165MHz-bandwidth. The Drain to Source resistance of this electronic component is 12Ohm. Multiplexer ics with 8 outputs are available.

TS3A5017PWR Features


4 Channels
Switch Circuit: SP4T
2.5μA Supply Current
Bandwidth: 165MHz
Drain-to-Source resistance: 12Ohm

TS3A5017PWR Applications


There are a lot of Texas Instruments TS3A5017PWR Analog Switches & Multiplexers ICs applications.

  • Low-Voltage
  • High speed data transmission line cards
  • High reliability control systems
  • Multiplexers
  • Residential Gateways, Home Gateway/Router
  • Switching Systems
  • Remote wireless modules
  • Cable Telephony – NIU, Set-Top Box, Home Side Box
  • Battery-powered systems
  • Signal routing between systems

Related Part Number

DG506ACJ+
Maxim Integrated
DG506ACJ+
$0 $/piece
ADG659YRQ
Rochester Electronics, LLC
ADG659YRQ
$0 $/piece
ADG5204BCPZ-RL7
Analog Devices Inc.
ADG5204BCPZ-RL7
$0 $/piece
ADG1213YCPZ-500RL7
Analog Devices Inc.
ADG1213YCPZ-500RL7
$0 $/piece
MC74VHC4053DTR2
ON Semiconductor
MC74VHC4053DTR2
$0 $/piece
AD8110AST
Rochester Electronics, LLC
AD8110AST
$0 $/piece
MAX4525EUB+
Maxim Integrated
MAX4525EUB+
$0 $/piece
MAX4541EUA+
Maxim Integrated
MAX4541EUA+
$0 $/piece
MAX333AEWP+
Maxim Integrated
MAX333AEWP+
$0 $/piece
ADG719BRTZ-500RL7
Analog Devices Inc.
ADG719BRTZ-500RL7
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News