TS3DS26227YZTR Overview

Shipping overseas is convenient due to the electrical component's packing in 12-UFBGA, DSBGA. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. In total, 12 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 12 pins. A SPDT switching circuit is used to build these analog multiplexers. Using the TS3DS26227 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 5Ohm. Please refer to the datasheets for 12 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.3V. 1μA current would be enough for this multiplexer to operate. Using a single voltage supply, this switch device consumes 2.3V~3.6V volts. The analogue multiplexer may be damaged if voltage is greater than 20nA. There are 2 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 800MHz bandwidths. Don't miss this electronic component's additional features, such as: ALSO REQUIRES AN SUPPLY OF 1.65V TO 1.95V. There are 4 outputs on the analogue multiplexer.

TS3DS26227YZTR Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 80MHz
Bandwidth: 800MHz
Additional Features: ALSO REQUIRES AN SUPPLY OF 1.65V TO 1.95V

TS3DS26227YZTR Applications

There are a lot of Texas Instruments TS3DS26227YZTR Analog Switches & Multiplexers ICs applications.

• Multiplexers
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Remote wireless modules
• Cross Connects
• Fiber In The Loop (FITL)
• New designs requiring multiplexer functions
• Battery Powered Instruments
• Cable Modem
• PCMCIA cards
• Remote Powered Equipment