TS5A22362DRCT-NM Overview

Shipping overseas is convenient due to the electrical component's packing in 10-VFDFN Exposed Pad. To ensure high reliability, a new packaging method Cut Tape (CT) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 10 terminations. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 2.5V, it should be turned on and run. Electronic part bodies are injected with 10 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching for TS5A22362 variants of the analog switch ic. It has an internal resistance of 940mOhm. For details about the functions of 10 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.3V. In order to operate this switch device, it would need a current of 200nA. An analogue multiplexer drains from a single voltage supply at 2.3V~5.5V. If put voltage greater than 1.3μA on the device, damage may be caused to the analogue multiplexer. There are 2 inputs to be operated. There are various bandwidths available for data transfer. This digital multiplexer has 4 outputs.

TS5A22362DRCT-NM Features

1 Channels
Switch Circuit: SPDT
200nA Supply Current
Bandwidth: 18.3MHz

TS5A22362DRCT-NM Applications

There are a lot of Texas Instruments TS5A22362DRCT-NM Analog Switches & Multiplexers ICs applications.

• Cable Modem
• Cross Connects
• Automotive applications
• Audio and video signal routing
• Private Branch Exchange (PBX)
• Battery Powered Instruments
• E1 Network Equipment
• High reliability control systems
• Automatic test equipment
• Relay replacements