TS5A23157DGSTG4 Overview

The electronic component is convenient to ship overseas because it is packed in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. There are 10 terminations totally. A electrical component with 1 channels is capable of high-quality output. A 1.8V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 10 series. A SPDT switching circuit is used to build these analog multiplexers. A 2 circuit is present in this switch device. Try searching for TS5A23157 variants of the analog switch ic. The internal resistance of this digital multiplexer is 10Ohm. Datasheets for functions of 10 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. Single supply type digital switch with a low cost. It is recommended to use 1.8V as the lowest voltage for the electrical part. An operating current of 1μA would be sufficient for this switch device. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. A digital multiplexer may suffer damage if voltage is applied above 10μA. There are 2 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 220MHz bandwidths. Additional features of the electronic component include: VIDEO APPLICATION. Multiplexer ics with 4 outputs are available.

TS5A23157DGSTG4 Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 220MHz
Additional Features: VIDEO APPLICATION

TS5A23157DGSTG4 Applications

There are a lot of Texas Instruments TS5A23157DGSTG4 Analog Switches & Multiplexers ICs applications.

• FTTH
• Channelized and Unchannelized DS3 applications
• DVD-R
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Routers
• Frame Relay Equipment
• High speed data transmission line cards
• Fault Tolerant Systems
• Power routing
• SDH/SONET multiplexers