DG9431DV-T1-E3 Overview

The electronic component is convenient to ship overseas because it is packed in a SOT-23-6 Thin, TSOT-23-6. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 6. A 1 channel electronic part produces high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. Into the electrical component body are injected 6 pins. These analog multiplexers are built based on SPDT switching circuits. Search with DG9431 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 30Ohm. For functions related to 6 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. Analog switch ics with Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 2.7V. 1μA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~5V. Putting voltage greater than 1μA on the multiplexer may cause damage. The electrical component supports 1 inputs. It has a Drain to Source resistance of 30Ohm ohms. In this digital multiplexer, there are 2 outputs.

DG9431DV-T1-E3 Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current
Drain-to-Source resistance: 30Ohm

DG9431DV-T1-E3 Applications

There are a lot of Vishay Siliconix DG9431DV-T1-E3 Analog Switches & Multiplexers ICs applications.

• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Audio and video routing
• PBXs
• HDTV
• High-Voltage
• Relay Replacement
• Audio/video switches
• Ultrasound
• Digital Cross-Connects
• RGB switches