TS5A3166DCKRE4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 5-TSSOP, SC-70-5, SOT-353. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 5 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. There are 5 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. Search with TS5A3166 if you are looking for analog multiplexer variants. It has an internal resistance of 900mOhm. The functions of 5 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Single supply type digital switch with a low cost. 1.65V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 10nA. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 100nA. There are SEPARATE OUTPUT outputs on this analog switch ic. There are 1 inputs to be operated. The transfer of data can be performed over 200MHz bandwidths.

TS5A3166DCKRE4 Features

1 Channels
Switch Circuit: SPST - NO
10nA Supply Current
Bandwidth: 200MHz

TS5A3166DCKRE4 Applications

There are a lot of Texas Instruments
TS5A3166DCKRE4 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems