35ns, 25ns SPST - NO 45Ohm Analog Switches BREAK-BEFORE-MAKE 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)
SOT-23
DG612DY-T1 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Number of Pins
16
Weight
665.986997mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2016
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
45Ohm
Terminal Finish
TIN LEAD
Additional Feature
VIDEO APPLICATION
Subcategory
Multiplexer or Switches
Max Power Dissipation
600mW
Technology
NMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
1.27mm
Time@Peak Reflow Temperature-Max (s)
30
Output
SEPARATE OUTPUT
Pin Count
16
Power Supplies
15-3V
Number of Channels
1
Max Supply Voltage
18V
Min Supply Voltage
10V
Power Dissipation
600mW
Max Supply Current
1μA
Turn On Delay Time
50 ns
Number of Inputs
4
Voltage - Supply, Single/Dual (±)
10V~18V ±10V~15V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-3V
Turn-Off Delay Time
35 ns
Max Dual Supply Voltage
15V
-3db Bandwidth
500MHz
On-State Resistance (Max)
45Ohm
Min Dual Supply Voltage
10V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
74 dB
Current - Leakage (IS(off)) (Max)
250pA
Channel Capacitance (CS(off), CD(off))
3pF 2pF
On-state Resistance Match-Nom
2Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
35ns, 25ns
Charge Injection
4pC
Channel-to-Channel Matching (ΔRon)
2 Ω
Crosstalk
-87dB @ 5MHz
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Height
1.55mm
Length
10mm
Width
4mm
Radiation Hardening
No
RoHS Status
Non-RoHS Compliant
DG612DY-T1 Product Details
DG612DY-T1 Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 16 terminations. A 1 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO switching circuits. Analog switches have 45Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 18V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 10V voltage fed to the electrical part below 10V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 15V. The voltage should be at least 10V if you are using dual power supplies. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. In order to operate the 4 inputs, there are several steps to follow. This electronic part has additional features, such as: VIDEO APPLICATION.
DG612DY-T1 Features
1 Channels Switch Circuit: SPST - NO -3db Bandwidth: 500MHz Additional Features: VIDEO APPLICATION
DG612DY-T1 Applications
There are a lot of Vishay Siliconix DG612DY-T1 Analog Switches & Multiplexers ICs applications.