TS5A3357DCUR Overview

Packed in 8-VFSOP (0.091, 2.30mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 3:1. The operating temperature is extended to around -40°C~85°C TA. There are 8 terminations totally. This electronic part offers high-quality output due to its 1 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 8 pins. Circuits based on SP3T switching are used to construct these analog switch ics. Look for analog switch ic variants by searching with TS5A3357. As far as internal resistance is concerned, it has 7Ohm. You can find the functions of the 8 pins in the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Single supply type digital switch with a low cost. 1.65V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 1μA current. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. 334MHz-bandwidths can be used to transfer data between multiplexers. The analog switch ics includes 3 outputs.

TS5A3357DCUR Features

1 Channels
Switch Circuit: SP3T
1μA Supply Current
Bandwidth: 334MHz

TS5A3357DCUR Applications

There are a lot of Texas Instruments TS5A3357DCUR Analog Switches & Multiplexers ICs applications.

• Modems
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Data Acquisition Systems
• Medical Instrumentation
• PBXs
• DSLAMs
• Digital access cross connects
• HDTV
• Fiber In The Loop (FITL)
• Audio and video switching