UC2525BDW Overview
With its 16-SOIC (0.295, 7.50mm Width) package, the switching controller fits the needs of most applications. For outputs of 2, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 8V~35V and has a 8V~35V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 100Hz~400kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Frequency Control, Ramp, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 20V is input. Searching "UC2525" will return other relevant dc to dc converter ics. 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 18V. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controllers work at 450kHz Hz. DC switching uses 14mA when it is dormant. A nominal working status is achieved when the input voltage is set to 35V.
UC2525BDW Features
Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2525BDW Applications
There are a lot of Texas Instruments
UC2525BDW DC to DC converter applications.
- Ball screw pair
-
- Computer application technology
-
- Network technology
-
- Automation technology
-
- CMM
-
- Various precision measuring instruments
-
- Various precision measuring detectors
-
- Flaw detection equipment
-
- Balance equipment
-
- Industrial robots
-
