UC28025DWG4 Overview

As a result of 16-SOIC (0.295, 7.50mm Width) compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 2 output generation. Packaging for the pmic consists of Tube solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 9V~30V and has a 9V~30V supply voltage. Suitable for working in an dc switcher that has a -40°C~105°C TA. In this switching controller, the switch can be set to 340kHz~460kHz. dc dc regulator can be generalized using Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Ramp, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. 16 terminations with various dc switching's functions. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. You can find other relevant dc to dc converter ics by searching "UC28025". There are 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. DC regulator outputs 13.5V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Switching controller operates at a frequency of 1MHz. Hence, CAN ALSO BE CONFIGURED IN PEAK CURRENT OR AVERAGE CURRENT MODE is used to better suit the DC to DC voltage regulator's situation. For nominal working status, the input voltage can be set as 30V. An input flow rate of 25mA could satisfy the switching converter 's operation requirements.

UC28025DWG4 Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN PEAK CURRENT OR AVERAGE CURRENT MODE

UC28025DWG4 Applications

There are a lot of Texas Instruments UC28025DWG4 DC to DC converter applications.

• Scientific testing
• Adjustable voltage or current linear circuits
• Experimental setup
• Serial communication converter
• Computer-related products
• SMT equipment
• Elevator lighting
• PSRR circuits
• Flaw detection equipment
• Shearing machines