UC2823ADWTR Overview

With a 16-SOIC (0.295, 7.50mm Width) package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 8.4V~22V. Work well in dc switchers with a -40°C~85°C TA. Using this switching controller, it is possible to switch at 400kHz~1MHz. The Surface Mount value makes it suitable for general dc dc regulator. Current Limit, Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 16 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. UC2823 can be used to locate other relevant dc to dc converter ics. 16 pins are on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 8.8V. Based on the test statistics, DC regulator outputs voltage 2V. At most, the dc to dc regulator accepts 20V input voltage. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. Switching controller operates at 1MHz Hz. For better satisfaction, the value of DC to DC voltage regulator is CAN ALSO BE CONFIGURED IN CURRENT MODE. Switching controller is necessary to provide a voltage of 12V. It is not recommended to supply more current to the controller than 36mA.

UC2823ADWTR Features

Transistor Driver Outputs
Switching Frequency: 400kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC2823ADWTR Applications

There are a lot of Texas Instruments UC2823ADWTR DC to DC converter applications.

• CNC system
• Cutting machine tools
• Product burn-in
• Smoke prevention equipment
• Current source circuits
• Special machining machine tools
• Computer monitoring equipment of building
• Flaw detection equipment
• Sensitive electronic devices
• Balance equipment