UC2825ADW Overview

With its 16-SOIC (0.295, 7.50mm Width) package, the switching controller fits the needs of most applications. For outputs of 2, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 8.4V~22V and has a 8.4V~22V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 400kHz~1MHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Frequency Control, Ramp, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Searching "UC2825" will return other relevant dc to dc converter ics. 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator should be 8.8V. Based on the test statistics, DC regulator outputs voltage 2V. If you are starting a new project, you should note the dc dc regulator's typical output current is 500mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. Switching controllers work at 1MHz Hz. This value is CAN ALSO BE CONFIGURED IN CURRENT MODE so that DC to DC voltage regulator better serves the purpose. There is a requirement for a 12V supply voltage. It is not recommended to supply more current to the controller than 36mA. For operation, the switching converter could be satisfied with 28mA current flow input.

UC2825ADW Features

Transistor Driver Outputs
Switching Frequency: 400kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC2825ADW Applications

There are a lot of Texas Instruments
UC2825ADW DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots