UC2825DWTR Overview

It comes in the 16-SOIC (0.295, 7.50mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8.4V~30V. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 340kHz~460kHz. dc dc regulators can be carried out with Surface Mount. Current Limit, Enable, Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. UC2825 can be searched for other relevant dc to dc converter ics. In total, switching converter has 16 pins. Switching converter type is specifically Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 8.8V. Statistically, DC regulator outputs 13V volts. This dc to dc regulator accepts only 30V input voltage at most. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 80 %. 1MHz is the frequency of the switching controller. For better satisfaction, the value of DC to DC voltage regulator is CAN ALSO BE CONFIGURED IN CURRENT MODE. There must be a voltage supply of 15V volts. A controller's current should not exceed 33mA.

UC2825DWTR Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC2825DWTR Applications

There are a lot of Texas Instruments
UC2825DWTR DC to DC converter applications.

• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment