UC2845AN Overview

It comes in the 8-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. 1 outputs are supported by the dc motor controller. A solid enclosure of Tube surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 7.6V~30V. Suitable for working in an dc switcher that has a -40°C~85°C TA. dc dc regulator is made easier with Through Hole. To ensure efficient switching, this dcdc regulator features a Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "UC2845". Switching converter has a total of 8 pins. Switching converter type is specifically Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 15V voltage. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. Switching controller operates at 500kHz Hz. You can set the input voltage to 25V for nominal working status. This voltage controller requires a supply voltage of 11V. There should be 25mA more than 25mA amps of current supplied to the controller.

UC2845AN Features

Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz

UC2845AN Applications

There are a lot of Texas Instruments UC2845AN DC to DC converter applications.

• Computer application technology
• Arc suppression circuits
• Alternators
• Series voltage regulation circuits
• Program control systems
• Computed tomography (CT)
• Emergency lighting monitoring equipment
• Electrical power transmission
• Energy management systems
• CNC system