UC3825DWG4 Overview

With a 16-SOIC (0.295, 7.50mm Width) package, the switching controller is suitable for a wide range of applications. For 2 outputs, the dc motor controller is appropriate. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 8.4V~30V. Worked in an dc switcher with a 0°C~70°C TA rating. Switching can be done at 340kHz~460kHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Ramp, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. An array of 16 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. Search for "UC3825" to find other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 8.8V. The test statistics indicate that DC regulator outputs a voltage of 3V. At most, the dc to dc regulator accepts 30V input voltage. You should note that the dc dc regulator's usual output current is 200mA. It is set to 85 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. A frequency of 1MHz is used by the switching controller. To better satisfy the need, DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE. Switching controller is necessary to supply a voltage of 15V. The controller should not be supplied with more current than 33mA. An input of 22mA current flow could satisfy the operation of the switching converter .

UC3825DWG4 Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC3825DWG4 Applications

There are a lot of Texas Instruments
UC3825DWG4 DC to DC converter applications.

• Servo drive system
• Digital display device
• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors